Making a Honda Prelude more secure and lower insurance coverage charges are frequent reasons to put in an alarm. Placing the alarm in the Honda Prelude requires a working knowledge of automobile electrical systems and primary tools. You may also add options like remote start and alert paging with an alarm install that takes a few hours.

Honda Prelude Car Alarm Installation Instructions

1. Read the alarm guide carefully and identify all of the parts. Open the hood and take away the positive battery cable. Look for an open area and mount the alarm siren in order that it faces the engine or again of the car. Connect the alarm power wire to the positive battery cable and run all the wires to the motive force side of the firewall. Feed the wires via the existing hole the place the engine wires are.
2. Mount the shock sensor as directed by the producer and run the wire to the driving force facet of the dash. Find the facility door lock relay if the car is provided and join the alarms power lock module.
3. Find the starter wire within the ignition harness underneath the steering wheel. Connect the beginning disable relay and run the wire into the dash. Mount the alarm management module as far back within the dash as possible by securing it to an current wire bundle with zip ties.
4. Drill a small hole in the dash for the LED light and snap it into place. Join the siren, energy, LED, door lock and start disable wires to the management module. Reconnect the positive battery cable and check the alarm. Alter the alarms sensitivity if needed and secure any loose wires with zip ties.